Printing The List Of Parameters
While the printer is turned OFF, switch to the Setting Mode by pushing simultaneously both buttons for at least two seconds. The printer prints the following settings (Standard configuration):
Datamax
Version: AA xx.xx
PRESENT SETTINGS
Communication parameters
Speed: 57600 baud
Data: 8 bits
Parity: None
Control: Hardware
ØTo keep these settings unchanged push the ‘NO’ key.
ØTo enter the
Set-up menu
To change settings:
ØUse the ‘No’ key to move from a chapter (section) to another.
ØUse the ‘YES’ key to enter a chapter (section).
Within a chapter (section):
ØUse the ‘No’ key to move from a parameter to another.
ØUse the ‘Yes’ key to validate your parameter.
| 21 |
