Datamax E-3202 manual If you want to Configure your E For this… Do this…

If you want to
configure your E-
3202 for this…	Do this…
The	1.	Make sure that a roll of continuous thermal paper is
Datamax/Seagull		installed in your E-3202.
driver, LabelToday,	2.	With your E-3202 powered up and both lights on,
and ESC/POS®		press the left-hand button (ON-LINE/YES), and
applications all require		hold it down until both lights go off. The E-3202 is
that you set the printer		now off.
to ESC/POS®	3.	Hold both buttons (ON-LINE/YES and LF/FF/NO)
emulation.		down until both lights come back on and the printer
WARNING! The		starts to print out the PRESENT SETTINGS.
	4.	When the printing stops, respond to the printed
LabelToday DMX-		message “To keep settings unchanged push the
E-3202 driver does		‘NO’ key. To enter the set-up menu push the ‘YES’
NOT work with		key” by pressing the left-hand button (ON-
other Windows		LINE/YES).
software.	5.	The SET-UP MENU instructions are then printed.
		“To change settings: use the ‘NO’ key to move
		from chapter to another. Use the ‘YES’ key to enter
		a chapter. Within a chapter use the ‘NO’ key to
		move from one parameter to another. Use the ‘YES’
		key to validate your parameter.”
	6.	Move through the communication settings making
		sure to set the parameters so that they match those
		of your PC’s communication port.
	7.	When you enter the Emulation chapter be sure to set
		it to ESC/POS®.
	8.	In the Character Set chapter the default is code page
		850, 12 x 24, USA. You can change it if needed.
	9.	In the Page chapter the default is six line per inch (6
		lpi). You can change it if needed.
	10.	In the Media chapter you can change it to Labels.
		The default is continuous Paper.
	11.	In the Other chapter you can turn on or off the Auto
		Line Feed and Auto Carriage Return if needed. You
		can also increase or decrease the contrast of the
		thermal print to make it darker or lighter.
	12.	When finished, all of your changes will be printed.
		If you want to save them, press the left-hand (ON-
		LINE/YES) button. If you do not want to save your
		changes, press the right-hand (LF/FF/NO) button.

16 E-3202 Printer