Control Panel Reference Table Continued…
Light Indicators | & Status |
| Possible Actions, Settings | |||
Red | Green | Printer | Pressing | Pressing | Other | Effect |
|
| Status | Left | Right |
|
|
|
|
| Button | Button |
|
|
ON | Blinking | Temporary |
|
| Head cool | The printer |
|
| off line |
|
|
| will |
|
|
|
|
|
| automatically |
|
|
|
|
|
| switch to on |
|
|
|
|
|
| line when the |
|
|
|
|
|
| head is at a |
|
|
|
|
|
| good |
|
|
|
|
|
| temperature |
Blinking | Blinking | Download |
|
| Download | The printer |
|
| mode |
|
|
| switches to |
|
|
|
|
|
| ON |
|
|
|
|
|
| automatically |
|
|
|
|
|
| when the |
|
|
|
|
|
| download is |
|
|
|
|
|
| complete |
4.1.4 Modes
Dump mode
The printer is in dump mode when a long push on the left button has been made while the printer was OFF (indicators off)
This mode will allow the user to verify the data received by the printer . While in dump mode, the printer will write the received data in hexadecimal. Dump is written on the first line printed.
Autotest mode
The printer performs an Autotest and prints a test page in order to check the printing module. Autotest is written on the first line printed. To perform this test; turn the printer off (both lights off). Then press and release the left button followed immediately by pressing and holding down the right button until the Autotest page begins to print.
12 |
|
