dbx Pro user manual DriveRack PX Wizard, Setup Wizard

Section 2 Getting Started

DriveRack® PX



2.4 DriveRack PX Wizard

Now that you have made all of your audio connections and have made yourself familiar with the front-panel navigation of the unit, you can easily optimize your system through the use of the DriveRack® PX Wizards. These allow for quick and accurate venue setups. There are three wizards: Setup, EQ, and AFS. Press hold any button in the Wizard section of the front panel to access them. The wizards are designed to be used in sequence (from top to bottom), but can be used individually as well.

Before you use the wizards, make sure the controls on your powered speakers are set the same on both speakers. For example, if you’re using subs, and they have a polarity setting, make sure they’re both set to the same polarity. Also, if your powered speakers have a Mic/Line setting, make sure they’re both set to Line, and if they have their own EQ settings, disable the EQ settings on the powered speakers.

The following section walks you through each of the wizards.

Setup Wizard

•From preset mode, press and hold the <SETUP> button and the display will appear as follows:

System Setup WIZARD

Press the <Next PG> button to continue.

•The display will appear as follows:

•Simply rotate the <Data> wheel to select either a Mono or Stereo input configuration. Once you have selected your input option, press the <NEXT PG> button and the display will appear as follows:

Main Speakers

JBL EON

EON10G2

®