DCS 954 Set, Set, Mute, Mute, blue, Mute, blue, Down, LEDs, Down, blue, Mode, white, Phase, Phase, Panel, white, Phase, Phase, Panel, Volume, CH1(L), CH2(R), Volume

dCS 954 User Manual		Manual for Standard Software Version 1.5x
dCS Ltd		June 2000
Mute
	Menu Set

The Mute button is dual function – on its own (blue type on the front panel), it mutes and unmutes the analogue outputs when the unit is locked to a source. With the other menu buttons (white type on the front panel) it is the menu Set button.

The analogue outputs are automatically muted at power up and remain so until

	lock is achieved, as indicated by the LED above the Mute switch. If “A-Cut”,
	page 22, is turned on, the unit will mute automatically if the source data is
	identified as non-audio.
	For Menu operation as the			button, see “The Software – the Menu” on
			Set
Phase	page 18.
		Menu Down

The Phase button is triple function – on its own (blue type on the front panel), it reverses the phase of the analogue outputs. If the “Panel” option, page 27, is set to Volume, it functions as the Volume down button. With the other menu buttons (white type on the front panel) it is the menu Down button.

The left hand LED above the Phase button lights if CH1(L) outputs are inverted, the right hand LED lights if CH2(R) outputs are inverted. Pressing the Phase button toggles both channels between absolute and inverted phase. Holding the button down causes the unit to cycle through the following sequence:

	LEDs		Ch1 (L) phase	Ch2 (R) phase
on		off
			inverted	absolute
off		on	absolute	inverted
off		off	absolute	absolute
on		on	inverted	inverted

			Table 1 – Phase LEDs and Channel Phasing
	Release the button when the required setting appears.
	For Menu operation as the					button, see “The Software – the Menu” on
					Down
De-Emphasis	page 18.
				Menu Up
	The De-Emphasisbutton is also triple function – on its own (blue type on the
	front panel), it sets the De-Emphasis characteristic. If the “Panel” option, page
	27, is set to Volume, it functions as the Volume up button. With the other menu
	buttons (	white	type on the front panel) it is the menu				Up	button.
	De-Emphasis is available for 32, 44.1 and 48kHz sample rates only.
	Pressing the button repeatedly causes the single digit Mode display to the
	right of the button to cycle through the following options:

Manual part no: DOC136954 iss 2B1 Page 14 file 135954ma2b1.pdf available from website

Contact dCS on + 44 1799 531 999	email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0)	web site: www.dcsltd.co.uk