DCS 954 Mode, Display, Display, De-Emphasis, Mode Display, Input Format, The Software – the Menu”, De-Emphasisin Use (low sample rates)

dCS 954 User Manual		Manual for Standard Software Version 1.5x
dCS Ltd		June 2000
	Display	De-Emphasis in Use (low sample rates)

AAutomatic - the unit automatically implements the De- Emphasis characteristic coded in the data stream. The display changes to 5 or C when De-Emphasis is automatically applied.

5The unit implements 50/15∝s De-Emphasis.

C The unit implements CCITT J17 De-Emphasis.

- De-Emphasis disabled.

Table 2 – Emphasis Indication, low sample rates

dCS recommend setting the unit to Automatic unless there is an error in the De-Emphasis message in the incoming data stream.

For Menu operation as the Up button, see the section “The Software – the Menu” on page 18.

Mode Display

At sample rates over 48kS/s, the single digit LED Mode display to the right of the De-Emphasisbutton shows the input format:

Display	Input Format
1	Single AES
2		Dual AES
3
		P3D mode
4	Quad AES or DSD 4-wire

Table 3 – Output Data format indication, higher sample rates

Manual part no: DOC136954 iss 2B1 Page 15 file 135954ma2b1.pdf available from website

Contact dCS on + 44 1799 531 999	email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0)	web site: www.dcsltd.co.uk