The vertical plastic baffle in the center of the system improves system cooling by guiding the airflow within the system. You must remove the baffle when performing certain procedures inside the system to improve access to some internal components.

Figure 5-4. Removing the Baffle

Removing the Baffle

To remove the baffle, lift the release tab at the end of the baffle near the front of the system, depress the release tab at the back end of the baffle, and slide the baffle upward.

NOTICE: You must reinstall the baffle to maintain proper airflow for system cooling.

Installing the Baffle

When you install the baffle, note the proper position of the back edge of the baffle in Figure 5-4. After aligning both ends of the baffle, slide the baffle into the system until the release tabs lock into place.

Checking the Equipment

This section provides troubleshooting procedures for equipment that connects directly to the system, such as the monitor, keyboard, or mouse. Before you perform any of the procedures, see "External Connections."

Troubleshooting the Video Subsystem

Problem

Monitor

Monitor interface cable

Video memory

Page 43
Image 43
Dell 1600SC manual Checking the Equipment, Removing the Baffle, Installing the Baffle, Troubleshooting the Video Subsystem