Dell 4150 owner manual To replace the hard drive in the hard drive bay

To replace the hard drive in the hard drive bay:

1Ensure that the work surface is flat and clean to prevent scratching the computer cover.

2Save and close any open files, exit any open programs, and then shut down the computer (see page 38).

3If the computer is connected to a docking device, undock it. See the documentation that came with your docking station for instructions.

4Disconnect the computer from the electrical outlet.

5Wait 10 to 20 seconds, and then disconnect any attached devices.

6Remove any installed PC Cards, batteries, and module bay devices.

Handle components and cards by their edges, and avoid touching pins and contacts.

7Ground yourself by touching a metal connector on the back of the computer. Continue to ground yourself periodically during this procedure.

8Turn the computer over, and remove the hard drive screw(s).

screw

hard drive

HINT: Dell does not guarantee compatibility or provide support for hard drives from sources other than Dell.

Adding and Replacing Parts

89