Dell 435MT manual Replacing the Card Retention Bracket, Disabled Enabled

12.Connect the computer and devices to electrical outlets, and then turn them on.

13.To complete the installation, see Configuring Your Computer After Removing or Installing a PCI Express Card.

Replacing the Card Retention Bracket

Replace the screw on the card retention bracket ensuring that:

•The notch in the top of the card or filler bracket fits around the alignment guide.

•The tops of all cards and filler brackets are flush with the alignment bar.

•The guide clamps are aligned with the guide notches.

1	alignment guide	2	filler bracket
3	alignment bar	4	card retention bracket
5	guide clamps (2)	6	guide notches (2)

Configuring Your Computer After Removing or Installing a PCI Express Card

NOTE: For information on location of connectors, see the Setup Guide. For information on installing drivers and software for your card, see the documentation that shipped with the card.

	Installed		Removed
Sound	1.	Enter system setup (see	1.	Enter system setup (see
Card		System Setup).		System Setup).
	2.	Go to Advanced Chipset	2.	Go to Advanced Chipset
		Features and select		Features and select
		Onboard Audio		Onboard Audio
		Controller, and then		Controller, and then
		change the setting to		change the setting to
		Disabled.		Enabled.
	3.	Connect the external	3.	Connect the external
		audio devices to the		audio devices to the
		sound card's connectors.		computer's back panel
				connectors.
Network	1.	Enter system setup (see	1.	Enter system setup (see
Card		System Setup).		System Setup).
	2.	Go to Advanced Chipset	2.	Go to Advanced Chipset
		Features and select		Features and select
		Onboard LAN Controller,		Onboard LAN Controller,
		and then change the		and then change the
		setting to Disabled.		setting to Enabled.
	3.	Connect the network	3.	Connect the network
		cable to the network		cable to the integrated
		card's connector.		network connector.

Back to Contents Page