6\VWHP%RDUG
memory module
center brace
system board
memory retention bracket thumbscrew
system fan assembly
)LJXUH |
To remove the system board from the chassis, perform the following steps:
1.Remove the system fan assembly.
2.Remove the center brace.
The center brace is secured by two screws on the right side of the chassis and one screw on the left, and both ends of the brace are hooked into the chassis walls. Remove the screws and work the brace up out of the chassis (see Figure
3.Disconnect all cables from the system board. Be sure to record where each cable is attached.
