Ultra-Small Form Factor Computer

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.

1Follow the procedures in "Before You Begin" on page 25.

NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.

2If applicable, remove the cable cover.

a If a security device is installed in the security cable slot, remove the device.

1

1release button

bPress on the release button, grasp the cable cover, and slide the cover to the left until it stops, and then lift the cable cover up and away.

3Remove the computer cover:

a Rotate the cover release knob in a clockwise direction, as shown in the illustration.

b Slide the computer cover forward by 1 cm (½ inch), or until it stops, and then raise the cover.

30

Quick Reference Guide

Page 30
Image 30
Dell 745 manual Ultra-Small Form Factor Computer