Dell 745 manual Security cable slot Cover release latch Computer cover

1Follow the procedures in "Before You Begin" on page 25.

2If you have installed a padlock through the padlock ring on the back panel, remove the padlock.

3Locate the cover release latch shown in the illustration. Then, slide the release latch back as you lift the cover.

4Grip the sides of the computer cover and pivot the cover up using the bottom hinges as leverage points.

5Remove the cover from the hinge tabs and set it aside on a soft nonabrasive surface.

CAUTION: Graphic card heatsinks may become very hot during normal operation. Ensure that a graphic card heatsink has had sufficient time to cool before you touch it.

1

3 2

1 security cable slot 2 cover release latch 3 computer cover

Quick Reference Guide

29