Dell 9300 owner manual Using the System Setup Program, Overview, Viewing the System Setup Screens

Environmental (continued)

Maximum shock (measured with a

2-ms half-sine pulse):

Operating	143 G
Storage	163 G
Altitude (maximum):
Operating	–15.2 to 3048 m (–50 to 10,000 ft)
Storage	–15.2 to 10,668 m (–50 to 35,000 ft)

Using the System Setup Program

Overview

NOTE: Your operating system may automatically configure most of the options available in system setup, thus overriding options that you set through system setup. (An exception is the External Hot Key option, which you can disable or enable only through system setup.) For more information on configuring features for your operating system, see the Windows Help and Support Center. To access help, see "Finding Information" on page 9.

The system setup screens display the current setup information and settings for your computer, such as:

•System configuration

•Basic device-configuration settings

•System security and hard-drive password settings

•Power management settings

•Boot (start-up) configuration and display settings

•Docking-device settings

•Wireless control settings

NOTICE: Unless you are an expert computer user or are directed to do so by Dell technical support, do not change the system setup settings. Certain changes might make your computer work incorrectly.

Viewing the System Setup Screens

1Turn on (or restart) your computer.

2When the DELL™ logo appears, press <F2> immediately. If you wait too long and the Windows logo appears, continue to wait until you see the Windows desktop. Then shut down your computer and try again.

Appendix

105