Dell 9300 owner manual If you are replacing a memory module, remove the existing module

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

3Turn the computer over, loosen the captive screws on the memory module cover, and then remove the cover.

NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory- module securing clips.

4If you are replacing a memory module, remove the existing module:

a Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.

b Remove the module from the connector.

memory module	securing clips
	(2 per connector)

notch

NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled “DIMMA” before you install a module in the connector labeled “DIMMB.” Insert memory modules at a 45-degree angle to avoid damaging the connector.

86

Adding and Replacing Parts