Dell 9300 owner manual Ground yourself and install the new memory module

NOTE: If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure.

5Ground yourself and install the new memory module:

a Align the notch in the module edge connector with the tab in the connector slot.

b Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it.

6Replace the memory module cover.

NOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.

7Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.

8Reinstall the hard drive. See "Hard Drive" on page 83.

Adding and Replacing Parts

87