Dell 9300 owner manual Returning a Hard Drive to Dell

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

To replace the hard drive:

1Follow the procedures in "Before You Begin" on page 81.

2Turn the computer over, and remove the hard drive screws.

screws (2)

hard drive

NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging. See "Protecting Against Electrostatic Discharge" in the Product Information Guide.

3Slide the hard drive out of the computer.

4Remove the new drive from its packaging.

Save the original packaging for storing or shipping the hard drive.

NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector.

5Slide the hard drive into the bay until it is fully seated.

6Replace and tighten the screws.

7If the new hard drive is not already pre-imaged, install the operating system and drivers for your computer.

Returning a Hard Drive to Dell

Return your old hard drive to Dell in its original or comparable foam packaging. Otherwise, the hard drive may be damaged in transit.

84

Adding and Replacing Parts