Dell 9300 owner manual Remove the hinge cover. See Hinge Cover on page

Models: 9300

1 132
Download 132 pages 20.31 Kb
Page 96
Image 96
4Remove the hinge cover. See "Hinge Cover" on page 92.

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

antenna cables

4Remove the hinge cover. See "Hinge Cover" on page 92.

5Remove the four screws securing the display.

6Disconnect the display cable, using the pull-tab.

display cable pull-tab screw (4)

antenna cables

display cable connector

7Lift the display away from the computer at a 90-degree angle. Ensure that the antenna cables and display cable are free from the routing channels and that the cables move freely when you lift the display.

When you replace the display, ensure that the ribbon tape around the display cable is securely tucked underneath the tabs. Insert the antenna wires through the hinge cover opening and then through the hole in the system board. Ensure that the antenna wires are not twisted and that they are securely attached to the Mini PCI card.

96

Adding and Replacing Parts

Page 96
Image 96
Dell 9300 owner manual Remove the hinge cover. See Hinge Cover on page