Dell 9300 owner manual Changing Your Audio Settings, Enabling the Display Settings for a TV

7Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on the computer.

8See "Enabling the Display Settings for a TV" on page 41 to ensure that the computer recognizes and works properly with the TV.

Changing Your Audio Settings

You can set the speaker configuration for PC speakers, headphones, or S/PDIF (digital output).

1Double-clickCyberLink PowerDVD in the All Programs menu.

2Click Settings.

3Click DVD.

4Click Audio Settings.

5Under Speaker Configurations, select your desired output.

6Click Back twice to return to the main menu.

If you selected SPDIF in step 5, also verify the following settings: a Exit PowerDVD.

b Double-click the speaker icon in the Windows notification area. c Click the Options menu and then click Advanced Controls.

d Click Advanced.

e Click Enable S/PDIF. f Click Close.

g Click OK.

h Reopen PowerDVD.

7Insert a DVD into the DVD drive. The DVD will autorun.

Enabling the Display Settings for a TV

Your computer may have either an ATI video-controller card or an NVIDIA video-controller card. See the following subsection that corresponds to the video controller installed in your computer.

ATI Video-Controller Card

NOTE: Ensure that you properly connect the TV before you enable the display settings.

1Click the Start button and click Control Panel.

2Click Appearances and Themes.

3Under or pick a Control Panel icon, click Display.

Using CDs, DVDs, and Other Multimedia

41