Using the System Setup Program | 125
Token
Setup opti on
Descriptio n
022E
Boot Mode
Enables booting to legacy mode, ensures compatibility
with operating systems that do not support UEFI.
0231
Active
Processor Cores
All four cores of the processor are enabled. This is
applicable for Quad-core processor only.
0232
Active
Processor Cores
Two cores of the processor are enabled. This is applicable
for Quad-core and Dual-core processors.
0233
Active
Processor Cores
Single core of the processor is enabled. This is applicable
for Quad-core and Dual-Core processors.
024B
C States
Sets to enable (default), the processor can operate in all
available Power C States.
024C
C States
Sets to disable, there are no C states available for the
processor.
024D
Pause on Errors
Enables the BIOS from prompting for F1/F2 on error.
BIOS pauses at F1/F2 prompt.
024E
Pause on Errors
Disables the BIOS from prompting for F1/F2 on error.
BIOS pauses at F1/F2 prompt
024F
Quiet Boot
Enables the display of the splash or summary screen,
rather than the detail of the POST flow.
0250
Quiet Boot
Disables the display of the splash or summary screen. The
user is able to see the detail of the POST messages.
0251
N/A
The first NIC is used for PXE boot, followed by NIC2.
0252
N/A
The second NIC is used for PXE boot, followed by NIC1.
0254
3F8h/2F8h
By default, set rear serial port address as 0x3F8 and
internal serial port address as 0x2F8.
0257
2F8h/3F8h
Set rear serial port address as 0x2F8 and internal serial
port address as 0x3F8.
025D
Optimizer Mode
Memory Operating Mode set to support Optimizer.
025E
Spare Mode
Memory Operating Mode set to support Sparing.