Dell C6220 II Installing the LSI 2008 SAS Mezzanine Card, Card bridge card System-board assembly

Figure 3-50. Removing and Installing the LSI 2008 SAS Mezzanine Card

1	screw (3)	2	LSI 2008 SAS mezzanine card
3	card bridge card	4	system-board assembly

Installing the LSI 2008 SAS Mezzanine Card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Place the LSI 2008 SAS mezzanine card on the system-board assembly. See Figure 3-50and Figure 5-12.

2Replace the three screws that secure the LSI 2008 SAS mezzanine card. See Figure 3-50.

3Reconnect all the cables to the LSI 2008 SAS mezzanine card.

4Replace the system-board assembly. See “Installing a System-Board Assembly” on page 171.

Removing and Installing System Components 223