Dell C6220 II owner manual Optional Mezzanine Cards, Removing the LSI 2008 SAS Mezzanine Card

Optional Mezzanine Cards

Removing the LSI 2008 SAS Mezzanine Card

NOTE: The LSI 2008 SAS mezzanine card is seated in PCI-E Gen3 x8 mezzanine slot 3 on the system board, which is not active in 1-processor configuration. See “C6220 II System Board Connectors” on page 325 and “C6220 System Board Connectors” on page 326 for the location.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Remove the system-board assembly. See “Removing a System-Board Assembly" on page 170.

2Disconnect all the cables from the LSI 2008 SAS mezzanine card.

3Remove the three screws that secure the LSI 2008 SAS mezzanine card. See Figure 3-50.

4Lift the LSI 2008 SAS mezzanine card out of the system-board assembly. See Figure 3-50.

222 Removing and Installing System Components