Dell C6220 II owner manual Removing the LSI 9265-8i Card for 2U Node

Removing the LSI 9265-8i Card for 2U Node

NOTE: The LSI 9265-8i card assembly should include the BBU interposer card which is connected to the LSI 9265-8i RAID battery. The illustrations in this section are just for your removal and installation reference. For more information of the LSI 9265-8i RAID battery, see “LSI 9265-8i RAID Battery” on page 209.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

NOTE: The LSI 9265-8i card can be supported only on the 1.5U riser card. For the information of the riser card, see “Removing the Riser card for 2U Node on page 218.

1Remove the system-board assembly. See “Removing a System-Board Assembly" on page 170.

2Disconnect the two SAS/SGPIO cables connecting to the LSI 9265-8i card assembly.

3Remove the five screws that secure the LSI 9265-8i card assembly. See Figure 3-34.

4Lift the LSI 9265-8i card assembly out of the system-board assembly. See Figure 3-34.

202 Removing and Installing System Components