Dell C6220 II owner manual Accessing System Features during Startup, Keystroke Description, F11

1

About Your System

Accessing System Features during Startup

The following keystrokes provide access to system features during startup. Note that the hot-keys of SAS/SATA card or PXE support are available in BIOS boot mode only. There is no hot-key to boot through the UEFI mode.

Keystroke	Description
<F2>	Enters the System Setup program. See “Start Menu” on page 68.
<F11>	Enters the BIOS Boot Manager. See “Boot Manager” on page 69.
<F12>	Starts Preboot eXecution Environment (PXE) / iSCSI boot.
<Ctrl><C>	Enters the LSI 9210-8i HBA Card or LSI 2008 SAS Mezzanine
	Card Configuration Utility. For more information, see the SAS
	adapter documentation.
<Ctrl><H>	Enters the LSI 9265-8i Card Configuration Utility. For more
	information, see the documentation for your SAS RAID card.
<Ctrl><Y>	Enters the MegaPCLI SAS RAID Management Tool.
<Ctrl><S>	Enters the utility to configure onboard LAN settings for PXE
	boot. For more information, see the documentation for your
	integrated LAN.
<Ctrl><I>	Enters onboard SATA Controller’s Configuration Utility.
<Ctrl><D>	Enter the Intel iSCSI setup menu.

About Your System 13