Dell service manual DellTM XFR D630 Fully Rugged Notebook Service Manual

DellTM XFR D630 Fully Rugged Notebook Service Manual

Ensure cables are properly routed.

2.Complete the seating of the system board and again verify the cables are in the correct positions, and the 3 gaskets for the power port, rear USB port and side USB port are correctly positioned.

3.Secure the system board using the 4 M2.5 x 5-mm screws (labeled with silver triangles on the system board).

4.Reconnect the cables near the WLAN card and the modem connector to the system board.

5.Reconnect the fan cable to the system board.

6.Install the processor (see Installing the Processor).

7.Install the processor thermal-cooling assembly (see Installing the Processor Thermal-Cooling Assembly).

8.Install any smart cards or smart card blanks into the smart card slot.

9.Install the PC card reader (see Installing the PC Card Reader Cage).

10.Install the speaker (see Installing the Speaker).

11.Install any wireless communication cards (see WWAN, FCM & SIM Cards, Wireless Local Area Network (WLAN) Cards, Internal Card with Bluetooth® Wireless Technology).

12.Install the palm rest (see Installing the Palm Rest).

13.Install the memory module (see Memory).

14.Install any media bay devices (see XBay Devices).

15.Install the keyboard (see Keyboards).

16.Install the hinge cover (see Installing the Hinge Cover).

17.Install the HDD (see Hard Drive).

Page 100 of 106 Revision A01