Dell D630 service manual Removing the Display Bezel

DellTM XFR D630 Fully Rugged Notebook Service Manual

Grommets

8.Install the keyboard (see Keyboards).

9.Install the hinge cover (see Installing the Hinge Cover).

10.3Removing the Display Bezel

CAUTION: Before working inside your computer, follow the safety instructions in the XFR D630 Product Information Guide and in the XFR D630 User’s Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

NOTE: Replacing the display bezel does not require removing the display assembly from the base.

NOTE: Replacement keyboard/palm rest overlays are not included in the bezel service kits.

1.Follow the instructions in Before You Begin.

2.Turn the computer top-side up, and then open the display all the way (160 degrees).

3.Remove bezel overlay. Start in the upper left or right corner to peel the overlay off of the bezel.

1

2

3

4

Top of Display

Page 62 of 106 Revision A01