Dell D630 service manual Removing the Processor Thermal-Cooling Assembly

DellTM XFR D630 Fully Rugged Notebook Service Manual

17.1Removing the Processor Thermal-Cooling Assembly

CAUTION: Before working inside your computer, follow the safety instructions in the XFR D630 Product Information Guide and in the XFR D630 User’s Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

1.Follow the instructions in Before You Begin.

2.Remove the hinge cover (see Removing the Hinge Cover).

3.Remove any installed media bay device (see XBay Devices).

4.Remove the keyboard (see Keyboards).

5.Remove the display assembly (see Removing the Display Assembly).

6.Remove the palm rest (see Removing the Palm Rest).

7.Remove the fan cover by removing the 4 screws that secure the fan cover, and then lift the fan cover out of the base.

Fan cover screws (4)

8. Remove, in consecutive order, the three screws labeled "1" through "3," on the assembly.

Page 86 of 106 Revision A01