Removing and Installing Parts 143
7
Connect the power and data cables to the drive.
8
Connect the data cable to the system board.
9
Slide the hard drive into the hard drive bay until it snaps in place.
10
Install the first hard drive (see "Installing a Hard Drive" on page141).
11
Check all cables to be certain that they are properly connected and firmly
seated.
12
Replace the support bracket (see "Replacing the Support Bracket" on page173).
13
Replace the computer cover (see "Replacing the Computer Cover" on
page174).
NOTICE: To connect a network cable, first plug the cable into the network port or
device and then plug it into the computer.
14
Connect your computer and devices to electrical outlets, and then turn
them on.
1second hard drive (optional) 2screws (4)
2
1
book.book Page 143 Monday, October 6, 2008 11:38 AM