154 Removing and Installing Parts
CD/DVD Drive CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions located in the Product Information Guide.
CAUTION: To guard against likelihood of electric shock, laceration by moving fan
blades or other unexpected injuries, always unplug your computer from the
electrical outlet before opening the cover.
Removing a CD/DVD Drive
1
Follow the procedures in "Before You Begin" on page 103.
2
Remove the computer cover (see "Removing the Computer Cover" on
page105).
3
Remove the bezel (see "Removing the Bezel" on page 135).
4
Disconnect the CD/DVD drive data cable from the system board
connector.
5
Disconnect the power cable and the CD/DVD drive data cable from the
back of the drive.
6
Pull the CD/DVD drive bay release lever gently and slide the CD/DVD
drive out through the front of the computer.
1
CD/DVD drive bay release
lever 2CD/DVD drive
1
2
book.book Page 154 Monday, October 6, 2008 11:38 AM