Setting Up and Using Your Computer 39
Connecting Two Monitors CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
If you purchased a graphics card that supports dual monitors, follow these
instructions to connect and enable your monitors. The instructions tell you
how to connect either two monitors (each with a VGA connector), one monitor
with a VGA connector and one monitor with a DVI connector, or aTV.
NOTICE: If you are connecting two monitors that have VGA connectors, you must have
the optional DVI adapter to connect the cable. If you are connecting two flat-panel
monitors, at least one of them must have a VGA connector. If you are connecting a TV,
you may connect only one monitor (VGA or DVI) in addition to the TV.
Connecting Two Monitors With VGA Connectors
1
Follow the procedures in "Before You Begin" on page 103.
NOTE: The integrated video card is disabled when an add-on graphics card is
installed. The integrated video card port is capped when the port is disabled.
Do not remove the cap to connect a monitor. The monitor will not function.
2
Connect one of the monitors to the VGA (blue) connector on the back of
the computer.
3
Connect the other monitor to the optional DVI adapter and connect the
DVI adapter to the DVI (white) connector on the back of the computer.
1optional DVI adapter 2DVI (white) connector
3TV-OUT connector 4VGA (blue) connector
*May not be present on your computer
4
2*
1
3*
book.book Page 39 Monday, October 6, 2008 11:38 AM