144 Removing and Installing Parts
15
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
16
Check the System Setup for drive configuration changes (see "Entering
System Setup" on page185).
Floppy Drive (Optional) CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
CAUTION: To guard against likelihood of electric shock, laceration by moving fan
blades or other unexpected injuries, always unplug your computer from the
electrical outlet before opening the cover.
NOTE: If you are adding a floppy drive, see "Installing a Floppy Drive" on page147.
Removing a Floppy Drive
1
Follow the procedures in "Before You Begin" on page 103.
2
Remove the computer cover (see "Removing the Computer Cover" on
page105).
3
Remove the bezel (see "Removing the Bezel" on page 135).
NOTE: The location/connectors may vary depending on your system type.For more
information, see "System Board Components" on page109.
4
Remove the CD/DVD drive (see "Removing a CD/DVD Drive" on page154).
book.book Page 144 Monday, October 6, 2008 11:38 AM