Removing the Hard Drive

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a)battery

b)base cover

3.Remove the screws that secure the hard drive to the computer. Slide the hard -drive latch to the unlock position and pull out the hard drive from the computer.

4.Flex the hard-drive bracket outward and pull out the hard drive from the bracket.

NOTE: A rubber filler is installed to the hard-drive bracket for 7 mm hard drives. It is designed to prevent vibrations and for correct installation of the 7 mm hard drives. 9 mm hard drives do not require the filler when installed into the hard-drive bracket.

24

Page 24
Image 24
Dell M4800 owner manual Removing the Hard Drive