7.Remove the screws that secure the display assembly to the computer. Lift up and remove the display assembly from the computer.
Installing the Display Assembly
1.Tighten the screws to secure the display assembly in place.
2.Connect the camera and LVDS cables to the connectors on the system board.
3.Place the LVDS cable bracket on the computer and tighten the screw to secure it to the computer.
4.Insert the wireless antenna cables through the routing hole on the chassis.
5.Tighten the screws at the bottom and back of the computer.
6.Route and connect the antenna cables to their connectors.
7.Install the:
a)palmrest
44
