Installing the Display Panel
1.Align the display brackets to the display panel.
2.Tighten the screws to secure the display brackets to the display panel.
3.Connect the LVDS cable and affix the adhesive tape.
4.Align the display panel in its original position on the computer.
5.Tighten the screws to secure the display panel to the display assembly.
6.Install the:
a)display bezel
b)battery
7.Follow the procedures in After Working Inside Your Computer.
Removing the Camera
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the:
a)battery
b)display bezel
3.Perform the following steps to remove the camera:
a)Disconnect the camera cable.
b)Remove the screw that secures the camera module to the computer.
c)Remove the camera module from the computer.
Installing the Camera
1.Connect the camera cable.
2.Place the camera module in its slot on the computer.
3.Tighten the screw to secure the camera module to the computer.
4.Install the:
a)display bezel
b)battery
5.Follow the procedures in After Working Inside Your Computer.
55
