Dell PP06XA, TM373 owner manual Replacing a Hard Drive in the Hard Drive Cage, Screws

Replacing a Hard Drive in the Hard Drive Cage

1Remove two screws on each side of the hard drive cage to free the hard drive, then lift the drive out of its tray in the cage.

NOTICE: When a hard drive is not in the computer, store it in protective antistatic packaging. See “Protecting Against Electrostatic Discharge” in the Product Information Guide.

1

2

1 screws 2 hard drive cage

2Remove the new hard drive from its packaging.

Save the original packaging for storing or shipping the hard drive.

3Place the new hard drive into the drive cage tray and secure it with two screws on each side.

a Install the hard drive so that the manufacturer’s label faces the bottom of the drive cage and the SATA connectors are at the open end of the cage.

b Install the primary hard drive in the tray labeled 0. You can install a secondary hard drive in the tray labeled 1.

154

Adding and Replacing Parts