Dell TM373, PP06XA owner manual Setting Display Resolution and Refresh Rate, Windows Vista

Windows Vista™

1Click the Windows Vista Start button , and click Control Panel.

2Under Appearance and Personalization, click Adjust screen resolution.

3In the Display Settings window, under Resolution, slide the slide bar to the left/right to decrease/increase the screen resolution.

4Click How do I get the best display? for further instructions.

Setting Display Resolution and Refresh Rate

NOTE: If you change the display resolution from the current settings, the image may appear blurry or text may be hard to read if you change the resolution to one not supported by your computer and display. Before you change any of the display settings, make a note of the current settings so you can change back to the previous settings if needed.

You can enhance the legibility of text and change the appearance of images on the screen by adjusting display resolution. As you increase resolution, items appear smaller on the screen. In contrast, lower resolution causes text and images to appear larger and can benefit people with vision impairments. To display a program at a specific resolution, both the video card and the display must support the program, and the necessary video drivers must be installed.

NOTE: Use only the Dell-installed video drivers, which are designed to offer the best performance with your Dell-installed operating system.

If you choose a resolution or color palette that is higher than the display supports, the settings adjust automatically to the closest supported values.

To set the display resolution and refresh rate for your display, perform the steps in the following section that corresponds to the operating system your computer is using.

Using the Display

41