Dell PP06XA, TM373 owner manual Remove the module from the connector 156, Captive screws

3Turn the computer over, loosen the captive screws on the memory module cover, and then remove the cover.

1

2

1 captive screws (2) 2 memory module cover

NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory-module securing clips.

4If you are replacing a memory module, remove the existing module:

a Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.

b Remove the module from the connector.

156

Adding and Replacing Parts