Dell PP19L manual Returning a Hard Drive to Dell, 113, Pull-tab

2

1

1 pull-tab 2 hard drive

5Remove the new drive from its packaging.

Save the original packaging for storing or shipping the hard drive.

NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector.

6Seat the new hard drive into the bay, and then slide it into the connector by sliding it away from the screw holes until it is fully seated.

7Replace the cover and tighten the screws.

8Install the operating system for your computer. See "Restoring Your Operating System" on page 104.

9Install the drivers and utilities for your computer. See "Reinstalling Drivers and Utilities" on page 101.

Returning a Hard Drive to Dell

Return your old hard drive to Dell in its original or comparable foam packaging. Otherwise, the hard drive may be damaged in transit.

Adding and Replacing Parts

113