Dell PP19L manual Installing a Memory Module in Connector Dimm a, Tab in connector slot

1

1tab in connector slot

6Replace the memory module cover and tighten the screws.

NOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.

7Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.

8Reinstall the hard drive. See "Hard Drive" on page 111.

9Turn on the computer.

As the computer boots, it detects the additional memory and automatically updates the system configuration information.

To confirm the amount of memory installed in the computer, click the Start button, click Help and Support, and then click Computer Information.

Installing a Memory Module in Connector DIMM A

The memory module connector labeled "DIMM A" is located under the keyboard.

1Follow the procedures in "Before You Begin" on page 109.

2Ground yourself by touching one of the metal connectors on the back of the computer.

NOTE: If you leave the area, ground yourself again when you return to the computer.

118

Adding and Replacing Parts