Dell XFR D630 service manual Installing the Standard Keyboard, Removing the Rugged Keyboard

DellTM XFR D630 Fully Rugged Notebook Service Manual

8.1.2Installing the Standard Keyboard

1.Attach the keyboard cable to the motherboard.

2.Lay the keyboard tray in position and tighten down the 15 captive screws.

3.Replace the hinge cover (see Installing the Hinge Cover).

8.2Rugged Keyboard

8.2.1Removing the Rugged Keyboard

CAUTION: Before working inside your computer, follow the safety instructions in the XFR D630 Product Information Guide and in the XFR D630 User’s Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

1.Follow the instructions in Before You Begin.

2.Turn the computer right-side up and open it.

3.Remove the hinge cover (see Removing the Hinge Cover).

4.Remove the 15 M2x6 captive screws (item 3 in image below) that secure the top and bottom metal brackets (items 1 and 2 in image below) around the keyboard. Remove the top and bottom metal brackets.

Page 41 of 106 Revision A01