DellTM XFR D630 Fully Rugged Notebook Service Manual
RF Passthru
Board
WWAN
Board
3.Remove the 2 screws from the base and lift the RF Passthru Board from the base. If the gasket is not attached to the bottom of the RF Passthru Board, remove the gasket from the base.
RF Passthru
Board Screws
24.2Installing the RF Passthru Board
NOTE: If a new RF Passthru Board is being installed, the replacement kit will include the RF Passthru Board, gasket, and 2 antenna cables.
1.Install the gasket to the bottom of the RF Passthru Board.
2.Attach the RF Passthru Board to the base using the 2 screws.
Page 103 of 106 | Revision A01 |
