DellTM XFR D630 Fully Rugged Notebook Service Manual
3.Attach the 2 antenna cables. Refer to the antenna cable wiring diagram to ensure the antenna cables are properly attached.
4.Install the system board (see Installing the System Board).
25 Bottom Chassis
25.1Removing the Bottom Chassis
CAUTION: Before working inside your computer, follow the safety instructions in the XFR D630 Product Information Guide and in the XFR D630 User’s Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).
1.Follow the instructions in Before You Begin.
2.Remove the system board (see Removing the System Board).
NOTE: When removing the system board you do not need to remove the system memory or the processor.
3.Remove the fan (see Removing the Fan).
4.Remove the RF passthru board (see Removing the RF Passthru Board).
5.Remove the modem cable (see Removing the Modem Cable).
Page 104 of 106 | Revision A01 |
