Dell XFR D630 service manual Removing the Palm Rest

DellTM XFR D630 Fully Rugged Notebook Service Manual

14 Palm Rest

CAUTION: Before working inside your computer, follow the safety instructions in the XFR D630 Product Information Guide and in the XFR D630 User’s Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

14.1Removing the Palm Rest

1.Follow the instructions in Before You Begin.

2.Remove the hinge cover (see Removing the Hinge Cover).

3.Remove any installed media bay device (see XBay Devices).

4.Remove the keyboard (see Keyboards).

5.Remove the display assembly (see Removing the Display Assembly).

6.Disconnect the coin-cell battery from the system board (see Coin-Cell Battery).

NOTE: You can leave the coin-cell battery in place (on the palm rest) unless you are installing a replacement palm rest, in which case you need to remove the coin-cell battery and place it in the replacement palm rest.

7. Remove the five screws from the top of the palm rest.

Palm rest screws

Page 78 of 106 Revision A01