Dell XFR D630 service manual Installing the System Board

DellTM XFR D630 Fully Rugged Notebook Service Manual

22.2Installing the System Board

NOTE: If a new system board is installed, the kit includes a new system board and separate new IO dash board, with instructions.

1.If you are installing a new system board, follow these instructions:

a.Remove the 2 M2 x 3-mm screws on the bottom of the original system board to separate the system board from the IO dash board.

b.Use the 2 M2 x 3-mm screws just removed to secure the new IO dash board to the new system board.

c.On the original system board, remove the 3 gaskets from the power port, rear USB port and side USB port.

Page 98 of 106 Revision A01