REMOVING BLADE AND BLADE GUARD FROM SAW
1.DISCONNECT TOOL FROM POWER SOURCE.
2.Loosen blade guard clamp knob (A) Fig. 11, and rotate blade guard (B) to the position shown.
3.With wrenches supplied (C) Fig. 12, loosen arbor nut
(D) as much as possible. NOTE: Arbor nut has left hand threads.
4.Lift cam (E) Fig. 13, which holds the blade guard (B) Fig. 12, in position and move the blade guard (B), outer blade flange (F), and blade (G) outward.
5.Lift blade guard (B) Fig. 14, and remove arbor nut (D), outer blade flange (F), and blade (G). Then remove blade guard (B).
A
B
Fig. 11
B
F
C
D G
Fig. 12
E
Fig. 13
B
G
F 
D
Fig. 14
10
