AUDIO/VIDEO ADJUST

Setting items

Setting details

 

 

Height Gain

Low : Reduce the front height channel volume.

Control the front

height Middle : Front height channel sound is output with standard sound

channel volume.

volume.

 

High : Increase the front height channel volume.

 

NOTE

 

“Height Gain” is displayed for the following settings.

 

• When the “Speaker Config.” – “Front Height” setting (vpage 106) is

 

set other than to “None”.

 

• When surround mode is “PLgz” or the PLgz decoder is used.

PLgz Height

ON : Audio is output from the front height speaker.

Determine whether to use

OFF : Audio is not output from the front height speaker.

front height channel.

NOTE

 

 

• “PLgz Height” is displayed with the settings listed below.

 

• When the “Speaker Config.” – “Front Height” setting (vpage 106)

 

is set to other than “None”.

 

• “PLgz Height” cannot be set if the HD Audio source being played

 

includes a front height channel. In this case, the Front height channel

 

is played back without decoding in PLgz mode, using the input signal.

AFDM

ON : Set.

(Auto flag detect mode)

OFF : Do not set.

Detect the source’s

 

surround back channel

[Example] Playing Dolby Digital software (with EX flag)

• When “AFDM” is set to “ON”, the surround mode is automatically set

signal and set the

to the DOLBY D + PLgx C mode.

optimum surround mode

• To play in the DOLBY DIGITAL EX mode, set “AFDM” to “OFF” and

automatically.

“Surround Parameters” – “Surround Back” to “MTRX ON”.

 

 

Some Dolby Digital EX sources do not include EX flags. If the playback

 

mode does not switch automatically even when “AFDM” is set to

 

“ON”, set “Surround Parameters” – “Surround Back” to “MTRX ON”

 

or “PLgx CINEMA”.

BD

99

Setting items

 

Setting details

 

 

Surround Back

nn For 2-channel sources

Sets the method of

 

ON : The surround back channel is used.

generating of the surround

 

OFF : No signal is played from the surround back channels.

back channel.

nn For multi-channel sources

 

 

 

Set the decoding method for the surround back channel.

 

 

ONz1 : Convert the 5.1-channel source of the DTS/DTS-HD input

 

 

signals to the 7.1-channel output recommended by DTS and then play.

 

 

MTRX ON : Generate and play the surround back channel signals from

 

 

the surround channel signals by means of the Dolby Digital EX decoder.

 

 

ES MTRXz2 : Generate and play the surround back channel signals

 

 

from the surround channel signals of the DTS source by means of the

 

 

DTS-ES decoder.

 

 

PLgx CINEMAz3 : Generate and play the surround back signals by

 

 

decoding the signals in the Dolby Pro Logic gx Cinema mode.

 

 

PLgx MUSIC : Generate and play the surround back signals by

 

 

decoding the signals in the Dolby Pro Logic gx Music mode.

 

 

OFF : Do not play the surround back channel.

 

z1

This can be selected when playing the 5.1-channel source of DTS/

 

 

DTS-HD.

 

z2 This can be selected when playing DTS sources.

 

z3

This can be selected when “Speaker Config.” – “Surr.Back”

 

 

(vpage 106) is set to “2spkrs”.

If the source being played contains a surround back signal, the decoder type is automatically selected by the AFDM function. Set “AFDM” to “OFF” to switch to your preferred decoder.

NOTE

If the setting in “Speaker Config.” – “Surr.Back” (vpage 106) is “None”, “Surround Back” is not displayed.

vSee overleaf

version Basic

version Advanced

Information