Setting items | Setting details |
Speaker | Surround Back : Sound is output from the surround back speakers. |
Make settings for the | Height : Sound is output from the front height speakers. |
speakers outputting sound | Wide : Sound is output from the front wide speakers. |
when playing back in | OFF : Sound is not output from the surround back speakers, front wide |
DENON original surround | speakers and front height speakers. |
mode. | NOTE |
| |
| Only speakers that are set to something other than “None” in “Speaker |
| Config.” (vpage 105) can be selected. |
Subwoofer | ON : The subwoofer is used. |
Turn subwoofer output on | OFF : The subwoofer is not used. |
and off. | NOTE |
| |
| This can be set when the surround mode is “DIRECT” (vpage 55) and |
| the “Subwoofer Mode” (vpage 106) is “LFE+Main”. |
Default | Yes : Reset to the defaults. |
The “Surround Parameters” | No : Do not reset to the defaults. |
settings are returned to the |
|
default settings. | When you select “Default” and press ENTER, | |
the “Return all settings to the default?” | ||
| ||
| prompt is displayed. Select either “Yes” or | |
| “No”, and press ENTER. |
AUDIO/VIDEO ADJUST
nnTone
Adjust the tonal quality of the sound.
Setting items | Setting details |
|
|
Tone Control | ON : Allow tone adjustment (bass, treble). |
Set the tone control function OFF : Playback without tone adjustment. | |
to ON and OFF. | “Tone Control” can be set when “Dynamic EQ®” (vpage 101) is |
| |
| set to “OFF”. |
NOTE
•“Tone Control” settings are not reflected to ZONE2 and ZONE3.
•The tone cannot be adjusted in the “DIRECT” mode.
Bass | ||
Adjust low frequency range | “Bass” can be set when “Tone Control” is set to “ON”. | |
(bass). | ||
| ||
Treble | ||
Adjust high frequency range |
|
(treble). | “Treble” can be set when “Tone Control” is set to “ON”. |
|
vSee overleaf
version Basic
version Advanced
Information
BD | 100 |