Playback in ZONE2/ZONE3 (Separate room)
•You can operate this unit so as to enjoy audio in a room (ZONE2, ZONE3) other than the MAIN ZONE (room where the unit is located).
•You can simultaneously play back the same source in both the MAIN ZONE, ZONE2 and ZONE3. You can also play back separate sources in the MAIN ZONE, ZONE2 and ZONE3.
w Zone playback by audio output (PRE OUT)
nnAudio connections (ZONE2, ZONE3)
The audio signals of this unit’s ZONE2 and ZONE3 audio output terminals are output to the ZONE2 and ZONE3 amplifiers and played on these amplifiers.
version Basic
The source selected for ZONE2 is also output from the recording output connectors.
Audio output
There are two methods to do this, as described below. Choose one of the methods.
qZone playback by speaker output
wZone playback by audio output (PRE OUT) Use an external amplifier.
ZONE2 | MAIN ZONE | ZONE3 |
| This unit |
|
| L | L |
| R | R |
AUX IN |
| AUX IN |
version Advanced
q Zone playback by speaker output
The ZONE2 and ZONE3 audio signals are output from this unit’s SURR.BACK/AMP ASSIGN speaker terminals using the amplifier assignment function.
nnConnecting and setting the speakers
| “Amp Assign” setting (vpage 105) | Connecting the speakers | ||||
| and audio signals output | |||||
|
|
|
|
| ||
|
|
|
| ZONE2 |
| |
ZONE2 | ZONE2 | Output signal : |
|
|
|
|
Stereo (L / R) |
| (L) | (R) |
| ||
|
|
|
|
| ||
|
|
|
| w | q w | q |
|
|
|
| ZONE3 |
| |
ZONE3 | ZONE3 | Output signal : |
| (L) | (R) |
|
Stereo (L / R) |
|
| ||||
|
|
|
|
|
| |
|
|
|
| w | q w | q |
|
|
| ZONE2 | ZONE3 | ||
ZONE2 |
| Output signal : |
|
|
|
|
and | Z2/Z3 (M) |
|
|
|
| |
Monaural |
|
|
|
| ||
ZONE3 |
|
|
|
|
| |
|
| w | q | w | q | |
|
|
| ||||
We recommend using high quality
NOTE
•When the input source to which the digital input connectors (OPTICAL/COAXIAL) are assigned is selected in ZONE2 or ZONE3, playback is only possible if the digital signal being input is in PCM
•It is not possible to play the digital audio signals input from the HDMI terminals in ZONE2 and ZONE3. Use analog connections for ZONE2 or ZONE3 playback.
•When certain digital signals are being input, noise may be output from the ZONE2 and ZONE3 audio output connectors.
Information
BD | 82 |