Connecting an HD Radio receiver
• By connecting a HD Radio antenna to this unit, you can receive |
HD Radio programs. |
nnAM loop antenna assembly
NOTE
Basic
• HD Radio broadcasting currentry is available in the United States and |
select other countries. |
Direction of broadcasting station |
|
|
| |
FM outdoor | AM loop antenna (for HD Radio | |||
broadcasting, supplied) | ||||
antenna | • To prevent interference, install | |||
|
| at least 3.3 ft/1 m away from | ||
|
| the antenna connected to the | ||
|
| this unit’s other AM tuner | ||
|
| terminal. |
| |
75 Ω coaxial | q | w | e | |
cable | ||||
|
|
| ||
1 Put the stand section through the bottom of the loop antenna from the rear and bend it forward.
2 Insert the projecting part into the square hole in the stand.
Stand
Square
hole
Loop Projecting
antenna part
•Do not connect two FM antennas simultaneously.
•Even if an external AM antenna is used, do not disconnect the AM loop antenna.
•Make sure the AM loop antenna lead terminals do not touch metal parts of the panel.
•If the signal has noise interference, connect the ground terminal (GND) to reduce noise.
•If you are unable to receive a good broadcast signal, we recommend installing an outdoor antenna. For details, inquire at the retail store where you purchased the unit.
version
version Advanced
White 
Black 
FM indoor antenna
(for HD Radio broadcasting, supplied)
nnUsing the AM loop antenna
Suspending on a wall
Suspend directly on a wall without assembling.
Nail, tack, etc.
Standing alone
Use the procedure shown above to assemble.
Information
AM outdoor
Ground antenna
16