Video output

Video Connection

The video signals of this unit’s ZONE2 video output terminal are played by the ZONE2 TV.

MAIN ZONE

ZONE2

This unit

VIDEO

VIDEO

 

 

 

 

IN

 

 

ZONE2

Playback

1 Press ZONE SELECT to switch the zone mode to K(ZONE2) or L

(ZONE3).

2 Press AMP to set the remote control unit to AMP-operation mode.

3 Press ZONE/DEVICE Z to turn on the ZONE2 or ZONE3 power.

The or indicator on the display lights.

Inputsource selectbuttons

Adjusting the volume

Use Mdf to adjust the volume.

GAdjustable rangeH – – – –80dB – –40dB – 18dB

(When the “Volume Display” (vpage 116) setting is “Relative”)

GAdjustable rangeH 0 – 41 – 99

(When the “Volume Display” (vpage 116) setting is “Absolute”)

•At time of purchase, “Volume Limit” (vpage 115) is set to “–10dB (71)”.

version Basic

Advanced

NOTE

•It is not possible to output video signals input to the HDMI or component terminals to ZONE2.

•The menu screen is not output.

BD

• Also press input source select button when in standby mode, the power turns on.

•When ZONE/DEVICE X is pressed, ZONE2

or ZONE3 turns off.

• Power in ZONE2 or ZONE3 can be turned on or off by pressing ZONE2 ON/OFF or ZONE3 ON/OFF on the main unit.

4 Press the input source select button.

The audio signal of the selected source is output to ZONE2 or ZONE3.

•To perform an operation with the main unit, press ZONE2 / REC SELECT or ZONE3 SELECT many times.

When power for both MAIN ZONE and ZONE2 (ZONE3) is set to ON,

power of the MAIN ZONE only can be turned off. Select J (MAIN ZONE) in step 1 then press ZONE/DEVICE X.

83

Turn MASTER VOLUME after pressing ZONE2 / REC SELECT or ZONE3 SELECT on the main unit to adjust the sound volume.

Turning off the sound temporarily

Press N.

The sound is reduced to the level set at “Mute Level” (vpage 115) in the menu.

•To cancel, either adjust the volume or press N again.

•The setting is canceled when the zone’s power is turned off.

You can adjust the tone and volume for ZONE2 and ZONE3 in “Zone Setup” (vpage 115) in the menu.

vSee overleaf

version

Information