Network Setup |
|
|
| Default settings are underlined. | |||
Make network settings. |
|
|
|
|
|
|
|
Setting items |
| Setting details |
|
| |||
Network Connecting | Only set “Network Connecting” when connecting to a network without a | ||||||
Make settings for wired | DHCP function. |
|
|
|
|
|
|
LAN. | NETWORK CONNECTING |
|
| ||||
|
|
| |||||
| DHCP |
| OFF |
|
|
| |
| IP Address |
| 192.168.0.1 |
|
| ||
| Exit |
|
|
| q |
| |
| Detail |
|
|
|
| ||
|
|
| Enter |
|
|
| |
| Set IP address and proxy manually |
|
|
| |||
| NETWORK CONNECTING w |
| |||||
| DHCP |
| OFF |
|
|
|
|
| IP Address |
| 192. | 168. | 000. | 001 |
|
| Subnet Mask |
| 255. | 255. | 255. | 000 | e |
| Default Gateway | 000. | 000. | 000. | 000 | ||
| Primary DNS |
| 000. | 000. | 000. | 000 |
|
| Secondary DNS |
| 000. | 000. | 000. | 000 |
|
| Proxy |
|
| r |
|
| |
| Exit |
|
|
|
| ||
RETURN Cancel
Set IP address manually
q On the menu, select “Network Connecting” – “Detail” and press ENTER.
w Use uio p to set “DHCP” to “OFF”, then press ENTER.
The DHCP function is disabled.
| SYSTEM SETUP |
|
|
Setting items | Setting details |
|
|
Network Connecting | e Use uio p or 0 – 9 to input the address and press ENTER. |
(Continued) | • IP Address : Set the IP address within the ranges shown below. |
| The Network Audio function cannot be used if other IP addresses |
| are set. |
| CLASS A: 10.0.0.1 – 10.255.255.254 |
| CLASS B: 172.16.0.1 – 172.31.255.254 |
| CLASS C: 192.168.0.1 – 192.168.255.254 |
•Subnet Mask : When connecting an xDSL modem or terminal adapter directly to this unit, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0.
•Default Gateway : When connected to a gateway (router), input its IP address.
•Primary DNS, Secondary DNS : If there is only one DNS address indicated in the documentation supplied by your provider, input it at “Primary DNS”. If there are two or more DNS addresses, input the first one at “Secondary DNS”.
rUse i to select “Exit” and press ENTER. Setup is complete.
•When connecting to the network via a Proxy server, select “Proxy” and press ENTER (vpage 112 “Proxy settings”).
•If you are using a broadband router (DHCP function), there is no need to make the settings at “IP Address” and “Proxy”, since the DHCP function is set to “ON” in this unit’s default settings.
•If this unit is being used connected to a network without the DHCP function, the network settings must be made. In this case, some knowledge of networks is required. For details, consult a network administrator.
•If you cannot connect to the Internet, recheck the connections and settings (vpage 19).
•If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the store from which you purchased your computer.
•When you want to cancel the setting during IP address input, press
RETURN B.
vSee overleaf
version Basic
version Advanced
Information
BD | 111 |